Uniwell NX-5400 User Manual download pdf (Page 7)

fine quality paper roll

44.5 mm x ø83 mm

Replacing Paper Rolls

Regarding terminal printers, refer to the respective printer's User's Manual.

Lift the printer cover.

Removing old paper:

Press the receipt or journal paper feed key to feed

the remaining paper through the printer or push the

green paper release lever towards the paper roll bed

and pull the paper through the printer. DO NOT

force paper through the printer as this may result in

damage to the printer mechanism or cause a paper

jam.

Inserting new paper:

Place the new paper in the correct position on the

printer's paper roll bed.

Make sure that the leading edge of the new paper

roll is cut straight across.

Set the paper release lever and insert the leading

edge into the printer slot.

In order to feed the paper, press the paper feed key

to the roll you are replacing.

In the case of the journal paper, insert the loose

end of the paper tightly to the slot of journal 'take-

up' spool.

< When paper jammed inside the paper guide >

Raise the paper guide by lifting both paper release

levers.

Remove the jammed paper by hand.

Close the paper guide.

Then, with both hands, gently press down both

sides of the paper guide.

Replacing the Ribbons

INK RIBBON: ERC-32 (Epson)

Lift the printer cover and remove the old ribbon.

Turn the ribbon feed knob to stretch tight.

While tilting the ribbon cassette forward slightly,

insert the ribbon between the print head and the

paper; push the ribbon cassette firmly into place.

Turn the ribbon feed knob once more to stretch

tight the ribbon.

right wrong

1 2 3 4 5 6 7 8 9 10 11 12 ... 89 90

No comments

Uniwell NX-5400 User Manual Page 7